Focusing on the research and development of products in the new energy field
Production, sales, and services
Focusing on the research and development of products in the new energy field
Production, sales, and services
Focusing on the research and development of products in the new energy field
Production, sales, and services
Focusing on the research and development of products in the new energy field
Production, sales, and services
Trapezoidal colored steel tile support seat (without guide rail)
Suitable for T-shaped colored steel tiles on roofs, the main structural material is aluminum alloy. Through professional design, the support seat is perfectly connected to the T-shaped colored steel tiles
Details
Trapezoidal colored steel tile support seat (with guide rail)
Mainly suitable for T-shaped colored steel tiles on roofs, the main structural material is aluminum alloy. Through professional design, the support seat is perfectly connected to the trapezoidal colored steel tiles
Details
L right angle support seat&screw type support seat
Mainly suitable for trapezoidal colored steel roof tiles, the main structural material is aluminum alloy. Through professional design, the support seat is perfectly connected with the T-shaped colored steel tile, achieving your installation requirements. With a tailored design scheme and excellent structural strength calculation, it helps you minimize the installation time and cost of the project to the greatest extent. The unique design of patented accessories brings you more fast installation experience.
Details
Flat support seat assembly
The flat support seat component is made of aluminum alloy as the main structural material. Through professional design, the support seat is perfectly connected with the T-shaped colored steel tile, achieving your installation requirements. The design scheme tailored to local conditions and excellent structural strength calculation help you minimize the installation time and cost of the project to the greatest extent. The unique design of patented accessories brings you more fast installation experience.
Details
Waterproof support seat
The main structure of the waterproof support seat is made of aluminum alloy. Through professional design, the support seat is perfectly connected to the T-shaped colored steel tile. The unique waterproof structure design allows you to avoid the trouble of roof seepage caused by installation, achieving your requirements for installation and protection of the roof. The design scheme tailored to local conditions and excellent structural strength calculation help you minimize the installation time and cost of the project to the greatest extent. The unique design of patented accessories brings you more fast installation experience.
Details
Flat support seat
The main structural material is aluminum alloy, and through professional design, the support seat is perfectly connected to the T-shaped colored steel tile.
Details
TPO roof fixed support system
The TPO roof fixed support system is mainly suitable for trapezoidal colored steel tile roofs laid with TPO waterproof rolls. The main structural material is stainless steel+aluminum alloy. Through professional design, the TPO roof fixed support is perfectly connected with the trapezoidal colored steel tile roofs laid with TPO waterproof rolls. The waterproof structural design allows you to avoid the trouble of roof water seepage caused by installation, achieving your requirements for installation and protection of the roof. The design scheme tailored to local conditions and excellent structural strength calculation help you minimize the installation time and cost of the project to the greatest extent. The unique design of patented accessories brings you more fast installation experience.
Details
standing seam
Suitable for roof color steel tiles, the main structural material is aluminum alloy, and the unique structural design allows for a perfect connection between the vertical locking style and the color steel tiles
Details
Facade locking 11
The main structural material is aluminum alloy, and through professional design, the support seat is perfectly connected to the trapezoidal colored steel tile to meet your installation requirements.
Details
standing seam
The vertical locking edge fixture is mainly suitable for roof colored steel tiles. The main structural material is aluminum alloy, and the unique structural design allows the vertical locking edge fixture to perfectly connect with the colored steel tiles, meeting your requirements for different installation conditions; A design scheme tailored to local conditions and excellent structural strength calculation, saving installation time and reducing installation costs; The unique design of patented accessories brings you a more efficient installation experience.
Details
Color steel tile photovoltaic support system PGT4
Color steel tile photovoltaic support system PGT4 This product has high pre installation characteristics and is suitable for the installation of various color steel tile roofs. Comprehensively optimize the strength of the system support square tube, improve the overall stability of the system, and further optimize the longitudinal beam structure. Professional structural design ensures the system's strength and has strong resistance to wind and snow. The support system can adjust the front and rear, left and right, and up and down directions, effectively improving the efficiency of engineering installation and greatly reducing installation costs.
Details
Angular fixture
Mainly suitable for colored steel tile roofs, the main structural material is aluminum alloy. Through professional design, the angle clamp is perfectly connected with the colored steel tile, achieving different installation requirements.
Details
Common Cooling Methods for C-shaped Steel Photovoltaic Supports after Rolling
Different cooling conditions after rolling of C-shaped steel photovoltaic brackets will result in different microstructures and properties. Controlling cooling can achieve the required performance, such as increasing cooling speed γ → α+ F (cementite) obtains fine grain structure, but for some low thermal conductivity and poor plasticity (alloy steel) that are prone to cold cracking, the commonly used cooling methods for C-shaped steel photovoltaic brackets include the following: 1. Water cooling: on the roller table or cold
2023-05-22
Details
How to consider the heating speed of solar photovoltaic brackets?
Heating rate refers to the heating rate of the metal surface, which is the temperature rise of the metal surface temperature per unit time, and its unit is ℃/hour. The heating speed is closely related to the heating time. The faster the heating speed, the shorter the heating time, and the higher the productivity of the furnace. When increasing the heating speed, it will be limited by the following factors: firstly, the internal temperature difference allowed by the metal itself; Another
2023-05-22
Details
Two connection methods for the photovoltaic support of the car shed during construction
1. The electric welding sleeve socket welding method is used to grind off the surface layer of the joint end of the photovoltaic bracket or other parts in the car shed with sandpaper. If there is still grease on the surface, it should be wiped clean with vinyl chloride or acetone; Insert both ends into the welding sleeve, and both ends must reach the middle point of the welding sleeve. When inserting, there should be no water at both ends. Then insert the secondary wire of the welding controller and start welding. Do not move or touch during the process
2023-05-22
Details
The difference between seismic support and traditional support
The difference between impact resistant brackets and traditional brackets is that they have different functions. Conventional supports mainly use a gravity loaded support system, while seismic supports mainly bear the horizontal load of the pipeline. The second is that the materials are different. Conventional brackets are prone to rusting and generally require maintenance paint after two to three years; The surface of the seismic support is galvanized, which has good corrosion resistance and less maintenance in the later stage. The third is different design elements
2023-05-22
Details
The difference between impact resistant brackets and traditional brackets
A system used to support photovoltaic cell components. Columns, supports, beams, shafts, guides, and accessories made of metal materials may also be equipped with transmission and control components to track the sun's orbit.
2023-05-22
Details
Two connection methods for the photovoltaic support of the car shed during construction
1. The welding sleeve socket coal joint method is used to grind off the surface layer of the joint end of the greenhouse photovoltaic bracket or other parts with sandpaper. If there is still grease on the surface, it should be wiped clean with vinyl chloride or acetone; Insert both ends into the welding sleeve, and both ends must reach the middle point of the welding sleeve. When inserting, there should be no water at both ends. Then insert the secondary wire of the welding controller and start welding. Do not move or touch during the process
2023-05-22
Details
Warmly celebrate the official website of Jiangsu Yisaier New Energy Materials Co., Ltd. officially launched and put into use!
The professional manufacturer of solar photovoltaic brackets supports environmental protection, maintains a green home, supports sustainable development, and strives to build a virtuous enterprise. Since its establishment, Yisaier New Energy has relied on its professional and outstanding independent innovation capabilities to integrate the design, research and development, manufacturing, and sales of solar photovoltaic bracket related products, adhering to the business philosophy of promoting and popularizing clean energy and sustainable development applications
2023-05-22
Details
Inquiry
